Answer

Before using the gyroscope, please ensure the handheld meets the following requirements:

1. The MSI Center M version is 1.0.2410.1701 or later.

    Please refer to FAQ-10185 to clean and install the MSI Center M.

2. The controller firmware version is 1.56 or later.

 

To adjust the gyroscope settings in MSI Center M, please refer to the following steps:

 

1. Go to the Gyro page in MSI Center M

    Go to MSI Center M > Control Mode > Gamepad mode > Gyro

 

2. Assign Gyro Behavior:

    i. Select "Right-stick," "Left-stick," or "Mouse" under Gyro Behavior to assign the gyroscope to hardware for controlling camera angles during gameplay.

    ii. Select "None" to unassign the gyroscope from all hardware, preventing gyroscope signals from being sent in-game.

        *In games natively support a gyroscope, please disable the gyroscope in the game settings as well to stop sending gyroscope signals in-game.

    

 

3. Set the Gyro Enable Button

    Select a button to control the gyroscope signal, or select "Always" to keep the gyroscope signal continuously active.

 

4. Define the Gyro Enable Button Behavior

    i. On: Hold the Gyro Enable button to enable the gyroscope signal.

    ii. Toggle: Press the Gyro Enable Button to switch the gyroscope on or off.

    iii. Off: Hold the Gyro Enable button to disable the gyroscope signal.

 

The settings above can be adjusted according to personal preferences or in-game experience.